Quanta LB4M Switch

The LB4M is a modular Gigabit Ethernet backbone switch designed for adaptability and
scalability. The Switch can utilize up to 48 Gigabit Ethernet ports to function as a central
distribution hub for other switches, switch groups, or routers. The one built-in 1000/100/10
Ethernet ports for out of service. The LB4M also provides SFP+ interfaces for 10-Giga port on
the daughter board. The number of 10-Giga ports depend on selecting daughter board.


‧ Supports 48 10/100/1000BASE-T RJ45 Ethernet ports
‧ 1 built-in 1000/100/10 Ethernet ports for out of service.
‧ Supports 802.1D STP, 802.1S MSTP, and 802.1w Rapid Spanning Tree for redundant back up bridge paths.
‧ Supports 802.1Q VLAN, Protocol-based VLAN, Subnet-based VLAN, MAC-based VLAN, Protected Port,
  Double VLAN, Voice VLAN, GVRP, GMRP, IGMP snooping, 802.1p Priority Queues, Port Channel, port mirroring.
‧ Support LLDP, VTP, Port Security
‧ Multi-layer Access Control (based on MAC address, IP address, VLAN, Protocol, 802.1p, DSCP)
‧ Quality of Service (QoS) customized control
‧ 802.1x (port-based) access control and RADIUS Client support
‧ Administrator-definable port security
‧ Per-port bandwidth control
‧ IEEE 802.3z and IEEE 802.3x compliant Flow Control for all Gigabit ports
‧ SNMP v.1, v.2, v.3 network management, RMON support
‧ Supports Web-based management
‧ CLI management support
‧ DHCP Client and Relay support
‧ DNS Client and Relay support
‧ Fully configurable either in-band or out-of-band control via RS-232 console serial connection.
‧ Telnet remote control console
‧ TraceRoute support
‧ Traffic Segmentation
‧ TFTP upgrade
‧ SysLog support
‧ Simple Network Time Protocol
‧ Web GUI Traffic Monitoring
‧ SSH Secure Shell version 1 and 2 support
‧ SSL Secure HTTP TLS Version 1 and SSL version 3 support
‧ ARP support
‧ IP Routing support
‧ OSPF v2 and v3 support
‧ RIP v1 and v2 support
‧ Router Discovery Protocol support
‧ VLAN routing support
‧ Virtual Router Redundancy Protocol (VRRP) support
‧ IP Multicast support
‧ Protocol Independent Multicast - Dense Mode (PIM-DM) support
‧ Protocol Independent Multicast - Sparse Mode (PIM-SM) support
‧ IGMP v1, v2, and v3 support
‧ DVMRP support
‧ IPV6 function Supports DHCPv6 protocol, OSPFv3 protocol, Tnneling, loopback
  Provides to configure IPv6 rotuing interface, routing preference